Learn To Bead

At Land of Odds / Be Dazzled Beads – Beads, Jewelry Findings, and More

Cleaning Sterling Silver Jewelry: What Works!

Posted by learntobead on April 15, 2020


It always amazes me about how many people (studies show that 25% of the population) think that when their sterling silver jewelry turns black, it’s Dead and they throw it out. So, especially if you are selling your stuff, you always need to educate people about cleaning sterling silver.

Sterling Silver tarnishes from the interaction of silver and sulfides in the air. First the tarnish will take on a golden hue, and eventually, it will turn the piece black. This is a natural process.

Higher sulfide levels are associated with humidity and/or pollution. Remember, the more humid the climate, the faster sterling will tarnish. On a summer day in Miami, Florida, all you have to do is walk out the door and the sterling starts turning black very quickly.

Sterling Silver will polish up by rubbing or buffing it with a soft cotton cloth. The best cloth to use is a piece of denim. Yes, rub it on your pants.

Jewelry stores either sell or give away what is called a Rouge Cloth. This is a little bit gimmicky, in that what is taking the tarnish off is the rubbing, not the rouge. In most cases, denim works better. Both denim and the rouge cloth are 100% cotton. Denim has ridges on it. The rouge cloth is smooth.

The ridges of the denim get inside the links on chains. The ridges get into the crevices in your jewelry. The rouge cloth is terrible for chains. However, if you want the crevices in your jewelry to remain black, the rouge cloth, which is a smooth surface, will work better.

You might also invest in what is called a Sunshine Cloth. Many bead stores and jewelry stores sell these. The Sunshine Cloth has a chemical in it that eats the tarnish but does not harm gemstones. And that’s its greatest selling point — it does not harm gemstones.

Sterling Silver dips are fast and easy, but are not the best choices here. Ideally you would never use a dip, or only use a dip in an emergency. First, many dips will take the color and the polish off many gemstones. Second, the dips work by pulling silver out your jewelry and creating a silver salt. The salt is usually white, sometimes black. This salt or residue gets caught inside the links of chains. It gets caught in the crevices in your jewelry. It is difficult to pick it out.

If you do have to use a dip, the way you use this dip is that you take your piece of jewelry, and put it in, and immediately take it out and rinse it off. If not clean enough, repeat. Never leave your jewelry in the dip. Then buff your jewelry with a soft cotton cloth. The buffing brings out more of the shine, and helps take off any residue left on the piece.

Most silver polishes do not work well with sterling silver jewelry. Repeated uses usually cut the shine and leave a white color to the sterling silver in jewelry. They primarily are used for silver plated kitchen ware and utensils. One exception, which I like, is Tarni-Shield — a silicon polish. Tarni-Shield will keep the piece of jewelry shiny until the shield wears off. We primarily us this product when we make a lot of jewelry that has to be on display for a long time, such as when we’re selling our pieces at an arts and crafts fair.

There are lacquer dips which coat your jewelry in order to keep the shine. (This is similar to painting clear nail polish on your jewelry). The lacquer, however, wears off unevenly, allowing some places to tarnish and others not. As the lacquer coating loosens in some areas, the silver will tarnish underneath it, but this area will still be inaccessible to your polishing cloth, until that lacquer actually chips or peels off. This can leave your pieces unsightly. If the piece is a chain, or a filigree, the lacquer will form a film within the openings and cracks. This obviously makes the piece ugly.

If you have some heavy duty tarnishing to deal with, then the easiest thing to do is to make a paste of baking soda and warm water, use a soft bristle toothbrush and scrub and rinse.

Even dry baking soda will take the tarnish off. You ruby your jewelry back and forth into a pile of dry baking soda, then use a cosmetic brush to pat the jewelry to get the powder off.

The effects of the baking sod, whether dry or as a paste, are almost instantaneous. You can also use baking powder. You can use baking soda toothpaste. If you have a large tea-pot, you can make a dip instead of a paste.

Some people sell set-ups using baking soda and tin foil, or baking soda and a sonic bath. These are gimmicks. What’s taking the tarnish off is the baking soda. That’s all you need.

Some Additional Advice

Never use a cleaner with ammonia or sulphur in it.

Sterling Silver is best stored in an air-tight, zip lock plastic bag, and in a drawer or somewhere out of the light. When you put the silver into the plastic bag, be sure to push out all the air before sealing the bag.

[Note: Sometimes you can restore that oily polished look on gemstones by rubbing them with men’s black shoe wax.]

Other Articles of Interest by Warren Feld:

Cleaning Sterling Silver Jewelry: What Works!

What Glue Should I Use When Making Jewelry?

Why Am I So Addicted To Beads?

A Very Abbreviated, But Not Totally Fractured, History of Beads

The Martha Stewart Beaded Wreath Project

When Choosing Colors Has You Down, Check Out The Magic Of Simultaneity Effects

The Use of Armature In Jewelry: Legitimate or Not?

Pearl Knotting Warren’s Way

Organizing Your Craft Workspace…Some Smart Pointers

You Don’t Choose Clasps, You Choose Clasp Assemblies

Know Your Anatomy Of A Necklace

Mini Lesson: Making Stretchy Bracelets

Mini Lesson: Making Adjustable Slip Knots With Thicker Cords

Mini Lesson: How To Crimp

Mini Lesson: Attaching End Caps, Cones, Crimp Ends

Mini Lesson: Brick Stitch

Mini Lesson: Flat Even Count Peyote

Mini Lesson: Ndebele Stitch

Mini Lesson: Petersburg Chain

Mini Lesson: Right Angle Weave

Jewelry, Sex and Sexuality

Everyone Has A Getting Started Story

The Nature-Inspired Creations of Kathleen

The Jewelry Designer’s Orientation To Glass Beads

The Jewelry Designer’s Orientation To Lampwork Beads

The Jewelry Designer’s Orientation To Crystal Beads

The Jewelry Designer’s Orientation To Seed and Cylinder Beads

The Jewelry Designer’s Orientation To Choosing and Using Clasps

I hope you found this article useful. Be sure to click the CLAP HANDS icon at the bottom of this article.

Also, check out my website (www.warrenfeldjewelry.com).

Subscribe to my Learn To Bead blog (https://blog.landofodds.com).

Visit Land of Odds online (https://www.landofodds.com)for all your jewelry making supplies.

Enroll in my jewelry design and business of craft video tutorials online.

Add your name to my email list.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: